180
Using program changes to recall scenes and library items
LS9-16/32 Owner’s Manual

The LS9 lets you assign a specific event (scene recall or effect library recall) to each program

change number, so that when this event is executed on the LS9, a program change message of

the corresponding number will be transmitted to an external device. Conversely, the correspond-

ing event can be executed when a program change message is received from an external device.

1Connect the LS9 to your external device.
The following illustration shows an example of using
the MIDI IN/OUT connectors to transmit and receive
MIDI messages.
2In the DISPLAY ACCESS section, press the
[SETUP] key repeatedly to access the MISC
SETUP screen.
3Move the cursor to the MIDI SETUP popup
button, and press the [ENTER] key to
access the MIDI SETUP popup window.
4As described in “Basic MIDI settings” (
p. 178), select the ports and MIDI channels
that will be used to transmit/receive pro-
gram changes.
5When you’ve finished making settings,
move the cursor to the CLOSE button and
press the [ENTER] key to close the popup
window.
You will return to the MISC SETUP screen.
6Move the cursor to the PROGRAM CHANGE
popup button, and press the [ENTER] key
to access the PROGRAM CHANGE popup
window.
In the PROGRAM CHANGE popup window you can
specify how program changes will be transmitted and
received, and choose the event (scene recall or effect
library recall) that will be assigned to each program
number.
This page includes the following items.
1PROGRAM CHANGE field
Here you can switch program change transmission/
reception on/off, and specify whether program
changes will be echoed out. This setting is linked with
the PROGRAM CHANGE field of the MIDI SETUP
popup window.
BPROGRAM CHANGE MODE field
Here you can select the program change transmit/
receive mode. This setting is linked with the PRO-
GRAM CHANGE MODE field of the MIDI SETUP
page popup window.
CList
This list shows the event (scene recall / effect library
recall) assigned to each program number. The list
shows the following items.
CH/BANK
Indicates the MIDI channel 1–16 on which pro-
gram changes are transmitted/received. In Single
mode if the BANK button is on, this will be
labeled BANK, and the numerical value in this
column will correspond to the bank number.
NO.
Indicates the program number 1–128.
Using program changes to recall scenes and library items
MIDI IN
LS9
MIDI OUT
external device
MIDI IN MIDI OUT
1
4
5
3
2