Yamaha M7CL owner manual 3, 4, 5

Changing the input patch settings
M7CL Owner’s Manual
Input/output patching
9
109
DInput port select tabs
These tabs select the input ports shown in the popup
window. Each tab corresponds to the following input
ports.
• IN 1–32 (M7CL-32/48)
...........INPUT jacks 1–32 will be displayed.
• IN 33–48 {M7CL-48}
...........INPUT jacks 33–48 will be dis-
played.
• ES 1–32, 33–48 (M7CL-48ES)
...........EtherSound input channels 1–32
and 33–48 will be displayed.
• ST IN (M7CL-32/48)
...........L/R channels of ST IN jacks 1–4 will
be displayed.
• OMNI (M7CL-48ES)
...........OMNI OUT jacks 1–8 will be dis-
played.
• SLOT 1–SLOT 3
...........Input channels 1–16 of slots 1–3 will
be displayed.
•RACK..............The output ports of rack 1–8 will be
displayed.
EInput port select buttons
These buttons assign an input port to the currently
selected input channel.
FTabs
Use these tabs to switch between thems.
3Access the input port selection screen of
the PATCH / NAME popup window, and use
the input port select tabs and input port
select buttons to select an input port.
4When you have finished making settings,
press the “×” symbol located in the upper
right to close the window.
You will return to the OVERVIEW screen.
5Repeat step 2–4 to assign input ports for
other channels.
• If PATCH CONFIRMATION is ON, a confirmation dialog box
will appear when you attempt to change the patch settings. If
STEAL PATCH CONFIRMA TION is ON, a confirmation dialog
box will appear when you attempt to change a location that is
already patched elsewhere. (For details, refer to → p. 214).
HINT
• In the PATCH / NAME popup window you can select the icon
for a channel or assign a name to it (
→ p. 59).
•You can also select input ports from the HA/PATCH popup
window.
HINT