About the internal effects
M7CL Owner’s Manual
Graphic EQ and effects
16
185
CEffect type field
This shows the effect title, the name of the type that is
used, and a graphic. The number of input/output chan-
nels (1 IN/2 OUT or 2 IN/2 OUT) of this effect is also
shown. When you press this field, the EFFECT TYPE
popup window will appear, allowing you to select the
effect type.
DEFFECT CUE button
This button cue-monitors the output of the currently
displayed effect. This cue function is valid only while
this screen is displayed. The cue will be cancelled
automatically when you switch to a different screen.
ESpecial parameter field
This shows special parameters that are specific to
some effect types.
FBYPASS button
This button temporarily bypasses the effect.
GInput/output meters
These indicate the level of the signals before and after
the effect.
HEffect parameter field
This area shows parameters for the currently selected
effect type. When you press a knob in this field, you’ll
be able to use the multifunction encoders to control the
corresponding horizontal row of knobs.
IRack select tabs
These tabs switch between racks 1–8.
3To change the effect type, press the effect
type field to open the EFFECT TYPE popup
window.
Press a new effect type to select it.
4To edit the effect parameters, press a knob
in the effect parameter field to select it, and
turn the corresponding multifunction
encoder.
5Edit the settings in the special parameter
field as necessary.
For some effect types, parameters such as the follow-
ing will appear in the special parameter field.

●TEMPO

This is shown if a tempo-type or modulation-type effect is
selected.
1MIDI CLK button
If you turn this button on, the BPM parameter of that
effect will be set to match the tempo of the MIDI tim-
ing clock being input from the MIDI port.

●PLAY/REC

This is shown if FREEZE is selected as the effect type.
1PLAY button / REC button
These buttons are used to record (sample) and play
back when using the freeze effect. For details on how
to use this, refer to “Using the Freeze effect” (→
p. 188).

●SOLO

This is shown if M.BAND DYNA. or M.BAND COMP. is
selected as the effect type.
1HIGH/MID/LOW buttons
These buttons pass only the selected frequency band
(multiple selections are allowed).
BGain reduction meters
These show the amount of gain reduction for each
band.
•You can also switch the effect type by recalling a library.
HINT
• Effect types “HQ.PITCH” and “FREEZE” can be used only in
rack 5 or 7. Also, even if you copy these two effect types, you
will not be able to paste them to rack 6 or 8.
NOTE
•For details on the parameters of each effect type, refer to the
supplementary material at the end of this manual (
→
p. 253).
HINT
1
1
1 2