M7CL Owner’s Manual
Making HA (Head Amp) settings
62
[HA/PATCH popup window (8 ch)]
Here you can make HA-related settings for a group of
eight channels.
1Channel select button
This shows the icon, channel number, and channel
name for the channel. When you press this button, that
channel will be selected for operations, and the corre-
sponding [SEL] key will light.
BINPUT PATCH button
This indicates the currently selected input port. You
can press this button to access the INPUT PORT
SELECT popup window, where you can select the
input port for each channel.
C+48V button
This switches the phantom power on (red) or off
(black) for the head amp assigned to this channel.
DGAIN knob
This indicates the gain of the head amp assigned to
this channel. Use multifunction encoders 1–8 to adjust
the value. The level meter located at the immediate
right of the knob indicates the input level for the corre-
sponding port.
Eø (Phase) button
This switches the head amp assigned to the channel
between normal phase (black) and reverse phase
(orange).
[HA/PATCH popup window (ALL)]
This window shows the head amp settings of all input
channels. Here you can also adjust the head amp gain
in groups of the selected eight channels.
1Channel select button
This indicates the channel number, the icon selected
for that channel, and the channel name. When you
press this button, that channel will be selected for
operations, and the corresponding [SEL] key will
light.
BGAIN knob
This indicates the gain of the head amp assigned to the
channel. To adjust the value, press the knob to select it,
and operate multifunction encoders 1–8.
The indicator located at the immediate right of the
knob indicates the presence or absence of a signal for
the corresponding port.
C+48V
This indicates the phantom power on (red) or off
(black) status for the head amp assigned to the chan-
nel.
Dø (Phase)
This indicates either normal phase (black) or reverse
phase (orange) for the head amp assigned to the chan-
nel.
4Access either the 1 ch or 8 ch HA/PATCH
popup window.
5Use the on-screen buttons or the multifunc-
tion encoders to edit the head amp gain,
phase, and phantom power on/off settings.
6Perform the same operations for other input
channels as desired.
If you are viewing the 1 ch HA/PATCH popup win-
dow, you can also use the [SEL] keys to switch the
channel for editing.
If you are viewing the 8 ch HA/PATCH popup win-
dow, you can use the navigation keys to switch the
channels being controlled in groups of eight channels.
7When you’re finished editing, press the “×”
symbol in the upper right of the window.
1
2
3
4
5
34
1
2
• The PAD will be internally switched on or off when the HA
gain is adjusted between -14 dB and -13 dB. Keep in mind
that noise may be generated if there is a difference between
the Hot and Cold output impedance of the external device
connected to the INPUT connector when using phantom
power.
• The GAIN knob, +48V button, and ø button are valid only for
channels whose assigned input port is an INPUT jack, ST IN
jacks (M7CL-32/48), OMNI IN jacks (M7CL-48ES), or a slot
that is connected to an external head amp device (e.g.,
Yamaha AD8HR, SB168-ES). (For details on connecting
external head amp devices
→
p. 190).
NOTE