Copying, moving, or initializing a channel
M7CL Owner’s Manual
Grouping and linking
11
133
6To execute the copy, press the COPY but-
ton.
The copy will be executed, and the settings will over-
write the parameters of the copy-destination chan-
nel(s). After the copy has been executed, the SOURCE
CH field and DESTINATION CHs field will return to
an unset state.
7To close the CH COPY MODE popup win-
dow, press the CLOSE button.
The settings of a specific input channel can be moved to a
different input channel. When you execute a Move opera-
tion, the numbering of the channels between the move-
source and move-destination will move forward or back-
ward by one.
You can move settings between the following combina-
tions of channels.
•Between INPUT channels
•Between ST IN channels
1In the function access area, press the CH
JOB button to access the CH JOB menu.
2Press the MOVE button to access the CH
MOVE MODE popup window.
This popup window lets you move channel settings.
1SOURCE CH field
This indicates the move-source channel. You can press
this field to cancel the channel that is shown.
BDESTINATION CH field
This indicates the move-destination channel. You can
press this field to cancel the channel that is shown.
CMOVE
Executes the move.
3To select the move-source channel, press
the corresponding [SEL] key to make it
light.
The corresponding channel is highlighted in the
SOURCE CH field of the window.
When you select the move-source channel, the DES-
TINATION CH field will automatically be embold-
ened, allowing you to select the move-destination.
If you want to re-select the move-source channel,
press the SOURCE CH field.
4To select the move-destination channel,
press the corresponding [SEL] key to make
it light.
The corresponding channel is highlighted in the DES-
TINATION CH field of the window. The channels that
can be selected will depend on the channel you
selected in step 3.
If you want to defeat the selected move-destination
channel, press the DESTINATION CH field.
5To execute the move, press the MOVE but-
ton.
The settings of all channels between the move-source
and move-destination will shift toward the move-
source by one channel, and the channel settings will
move from the move-source to the move-destination.
When the Move has been executed, the SOURCE CH
field and DESTINATION CH field will return to an
un-set state.
6To close the CH MOVE MODE popup win-
dow, press the CLOSE button.

Moving the parameters of a

channel
1 2 3 4 5
1 5 2 3 4
Move
Move by one
MOVE button
1
3
2
•Settings for the Move operation can be made only in the order
of “move-source”
→
“move-destination.”
NOTE