Yamaha M7CL 1, 2, 3, 4, 5, 1, 2, 3, 4

M7CL Owner’s Manual

Using the tool buttons

Here’s how the EQ/dynamics settings of the currently

selected channel or the GEQ/effect settings of a rack can

be copied to a buffer memory and pasted to another chan-

nel or rack.

Copy/paste operations are restricted to the following com-

binations.

•Between input channel EQ settings

•Between output channel EQ settings

•Between dynamics processors for which the paste-

destionation has the same type (GATE, DUCKING,

COMPRESSOR, EXPANDER, COMPANDER-H,

COMPANDER-S, or DE-ESSER) as the copy-

source

•Between effects/GEQ mounted in a rack

1Open a popup window that provides the

tool buttons.

2Select the channel (EQ/dynamics) or rack

(GEQ/effect) whose settings you want to

copy.

3Press the COPY button.

The current settings will be saved in the buffer mem-

ory.

4Select the paste-destination channel or

rack.

5Press the PASTE button.

The settings of the channel (EQ/dynamics) or the rack

(GEQ/effect) you selected in step 2 will be pasted.

You can use the COMPARE button to exchange the set-

tings held in the buffer memory with the settings of the

currently selected channel (EQ/dynamics) or rack (GEQ/

effect). This is convenient when you want to temporarily

keep the settings at a certain point, and compare them later

with the subsequently edited settings.

1Open a popup window that provides the

tool buttons.

2Select a channel (EQ/dynamics) or rack

(GEQ/effect).

3Press the COPY button to place the current

settings in the buffer memory.

This will be the ﬁrst set of settings.

4Edit the settings of the currently selected

channel (EQ/dynamics) or rack (GEQ/

effect).

This will be the second set of settings.

Copying/pasting settings

• Only 31BandGEQ settings that use less than ﬁfteen bands

can be copied to a Flex15GEQ.

HINT

•Be aware that if you copy other settings before you paste, the

buffer memory will be overwritten.

•You can select only one channel or rack as the copy-source.

If multiple channels are selected in the 8 ch/ALL popup win-

dow, you won’t be able to press the COPY button.

NOTE

•If you’re pasting EQ/dynamics settings, you can use the 8 ch

ALL popup window to select multiple channels as the paste-

destination. In this case, the same content will be pasted to

all selected channels.

HINT

•Be aware that when you paste, the settings will overwrite the

paste-destination.

• If nothing has been stored in the buffer memory, the PASTE

button cannot be pressed.

• Of the two types of GEQ, using the tool buttons in a rack

where a Flex15GEQ is selected will cause the settings to be

copied/pasted individually.

• Effect settings with an effect type of “HQ.Pitch” or “Freeze”

cannot be pasted to rack 6 or 8.

NOTE

Comparing two settings

•Be aware that if you copy other settings before you compare,

the buffer memory will be overwritten.

NOTE

• After you’ve stored the ﬁrst set of settings in the buffer mem-

ory, you can initialize the channel or rack and edit the second

set of settings from an initialized state if desired.

HINT