M7CL Owner’s Manual

Basic MIDI settings

198

Here’s how to select the type of MIDI messages the M7CL will transmit and receive, the MIDI

port that will be used, and the MIDI channel.

1

In the function access area, press the
SETUP button to access the SETUP screen.

2

In the center of the screen, press the MIDI
button to access the MIDI popup window.

This window includes several pages, which you can
switch between using the tabs located at the bottom of
the window.

3

Press the MIDI SETUP tab to access the
MIDI SETUP page.

In the MIDI SETUP page you can select the type of
MIDI messages that will be transmitted and received,
and choose the port that will be used. This page
includes the following items.

1

PORT/CH field

Here you can select the port and MIDI channel that
will be used to transmit and receive MIDI messages. If
MIDI messages are being transmitted or received, the
SIGNAL indicators at the top of this area will light.

B

Port select popup button

Opens the MIDI SETUP popup window, where you
can select the MIDI message transmission (Tx) and
reception (Rx) ports.

C

Channel select popup button

Opens the MIDI SETUP popup window, where you
can select the MIDI message transmission (Tx) and
reception (Rx) channels.

D

PROGRAM CHANGE field

Here you can make settings for program change trans-
mission and reception.

• Tx button

.......Switches program change transmis-
sion on/off.

• Rx button

.......Switches program change recep-
tion on/off.

• ECHO button

...........This selects whether incoming pro-
gram changes are echoed-out from
the MIDI transmission port.

E

PROGRAM CHANGE MODE field

Here you can select the program change transmit/
receive mode.

• SINGLE button

...........If this button is on, program changes
will be transmitted and received on a
single MIDI channel.

• OMNI button

..If this button is on, program changes
of all MIDI channels will be received
in Single mode. (Multi mode trans-
mission/reception and Single mode
transmission are disabled.)

•BANK button

...........If this button is on, bank select mes-
sages can be transmitted and
received in Single mode. (This is
disabled for Multi mode transmis-
sion/reception.)

• MULTI button

...........If this button is on, program changes
will be transmitted/received on multi-
ple MIDI channels (Multi mode).
Basic MIDI settings
MIDI button
Tabs
1
4
6
5
7
8
9
23
•For details on how to assign the scene or effect for each pro-
gram number, refer to “Using program changes to recall
scenes and library items” (
→
p. 200).
HINT