User Interface 21

02R User’s Guide
CURSOR Buttons
The CURSOR buttons are used to select parameters and options on the
display. The selected parameter or option usually appears highlighted.
The CURSOR buttons are also used to position the cursor in a name when
naming automix mixes, scene memories, EQ programs, effects programs,
dynamics programs, and channel library programs.
When a display left or right icon appears at the left or right side of a page,
indicating that another display page is available, the CURSOR buttons are
used to select that display.
Encoder Wheel
The encoder wheel is used to adjust the parameter selected using the
CURSOR buttons. Its detented action gives it a positive feel, allowing quick
and accurate parameter adjustments. Turning it clockwise increases the
selected parameter value. Turning it counterclockwise decreases the
selected parameter value. The faster you turn it, the faster the parameter
value changes.
The encoder wheel is also used to scroll through the automix programs,
mix scenes, effects programs, EQ programs, and dynamics processor
programs. When naming automixes, mix scenes, user effects programs,
user EQ programs, and user dynamics programs, the encoder wheel is
used to scroll through the available characters.
ENTER Button
The [ENTER] button is used to confirm settings made using the encoder
wheel and to toggle two-option parameters such as EQ ON/OFF.
SCENE MEMORY Buttons
These buttons allow you to select, store and recall scene memories. The
current scene memory is indicated on the SCENE MEMORY LED.
CURSOR
ENTER
STORE RECALL
SCENE MEMORY