MIXING Display Functions 37

02R User’s Guide

Pan Positions

Pan Gang
When channels are configured as a stereo pair, pan controls remain
independent. Using the Gang function pan controls of adjacent channels
can be ganged together, indicated by dotted lines between the two controls,
as shown below.
To cancel the Gang function, press the [ENTER] button again. The dotted
lines between the pan controls disappear.
Stereo Width
When channels are configured as a stereo pair, the width of a stereo signal
can be set using the pan controls. When the pan controls are set hard-left
and hard-right, the stereo width is 100%. With both pans set to center the
stereo width is 0%. Setting the controls to a position in between allows you
to set the stereo width from 0% to 100%. To maintain a central balance,
however, you must set both controls to a corresponding left and right
values. For example, L5 and R5, or L10 and R10.
Including center, there are 33 pan positions:
L16 L15 ... L2 L1 CR1 R2 ... R15 R16
1. Press the [PAN] button.
2. Select a channel using
the [SEL] buttons or the
CURSOR buttons.
3. Press the [ENTER] button
to connect the odd and
even channels together.
Pans can also be linked
by pressing the PAN
L/ODD and R/EVEN
buttons at the same
time.
PAN