168 MIDI
02R User’s Guide
MIDI Machine Control
02R controls can be used to remotely control the following parameters of a
a device that supports MMC (MIDI Machine Control), such as a recorder.
Transport functions on MMC supporting device can be controlled from the
02R using MIC [ON] buttons 1 to 6. Up to eight locate points can be set
using the CURSOR buttons and encoder wheel, and TAPE [ON] buttons 1
to 8 are used to locate the specified points. These locate points are linked
with the capture buffers in Automix mode, and when time code is inputted,
press the [ENTER] button while the cursor is on the locate point number to
capture the time code. Time reference and frame rate are also linked with
the Automix mode. Set the Device Number (DEVICE NO) to match that
assigned to the MMC device.
02R Controls Parameters on the
MMC Device
[ON] buttons MIC 1 Rewind
MIC 2 Fast Forward
MIC 3 Stop
MIC 4 Play
MIC 5 Pause
MIC 6 Record
TAPE 1–8 Locate points 1–8 recall