46 Secondary Recording Tutorial

02R Getting Started Guide
Applying Effects
The 02R features two internal multi-effects stereo processors: Effect 1 and
Effect 2. These are fed by AUX 7 and AUX 8, and the processed signals are
returned via EFF 1 RTN and EFF 2 RTN, respectively. When you use the
internal effects, the signal gets processed without ever leaving the digital
domain.
Effects can be applied to input channels or the tape return channels. Effects
are organized into programs. There are 40 preset effects programs (1
through 40) and 88 user effects programs (41 through 128 plus an UNDO
buffer) for you to store your own settings.

Setting the Send Levels

The process for applying effects is similar to the steps as detailed in
“Setting the Aux Send Level” on page 43 of the Getting Started Guide. The
following example shows applying effects to MIC/LINE 1 using AUX 7.
1. Use the [AUX 7] button to locate the AUX 7 1/3 page shown
below.
The faders automatically move from the channel level positions to the aux
send level positions. Even though the fader has changed positions, the 02R
remembers the channel signal levels.
2. Select MIC/LINE 1 using the [SEL] buttons or the CURSOR buttons.
Turn the aux send on by pressing the [AUX 7] button and then the [ON]
button in the AUX group of the SELECTED CHANNEL controls.
3. Press the [ENTER] button to change the aux send from pre to post
fader.
Note: Avoid blocking the fader movements when the faders move to their aux
send positions by placing objects on the 02R. It is possible to damage the faders.
AUX 7
EFF1