Yamaha O2R 142 Automix, Using MIDI Clock

142 Automix
02R User’s Guide
MIDI IN jack, any MTC arriving at the MTC jack is ignored, and vice
versa.
Using MIDI Clock
Automix can be referenced to an external MIDI Clock, and supports
Timing Clock (F8H), Start (FAH), Continue (FBH), Stop (FCH), and Song
Position Pointers (F3H, **H, **H).
Use MIDI Clock when you want to synchronize an automix to a MIDI
sequencer that does not support MTC. Use a MIDI cable to connect the
MIDI OUT connector of the controlling device to the TIME CODE
INPUT—MTC connector on the back of the 02R.
Note: When transmitting MTC to the 02R, you should use a dedicated output
on the connected device. Otherwise the 02R has to discard MIDI playback data and
other extraneous information, decreasing the accuracy of the timecode data.
MIDI Time code
TIME CODE INPUT (MTC)
or
MIDI IN
MIDI OUT (MTC OUT)
MIDI sequencer
MIDI Clock
TIME CODE INPUT (MTC)
MIDI OUT
MIDI sequencer