Zebra Technologies UMAN-MZA-007 manual Getting Ready to Print, Battery

Getting Ready to Print

Battery

Installing and Removing the Battery

Important • Batteries are shipped partially charged. Remove any protective packaging from new battery packs prior to use.

Figure 2.1: Installing the Battery

1.Use a coin to rotate the Battery Compartment lock 1/4 turn as shown.

2.Remove the Battery Compartment Cover

Battery Pack

Note location of label	3. Plug the Battery
	Packconnectorintothe
	Printer.

4.Re-install the Battery Compartment Cover and rotate the lock back 1/4 turn to lock it in place .

Ensure the battery leads are not pinched prior to replacing the battery cover.

10

MZ Series User Guide