Adjustable Shoulder Strap
Refer to Figure 14 if you have ordered the shoulder strap op- tion for your printer. Secure each end of the shoulder strap as shown below. Use the main buckle on the shoulder strap to adjust to the desired length.
NOTE: If you are using a shoulder strap, ensure it is pulled away from the printer when installing in the Power Station. See page 13.
Thread the free end of the shoulder strap through one of the slots on the belt clip
Thread the free end of the shoulder strap through the buckle and pull tight to adjust.
Secure the other end of the strap in the remaining slot on the belt clip.
Pull Strap here to 
lengthen
| Hold Buckle |
Pull Strap here to | Oncetheshoulderstrapissecured, |
shorten | |
| slidethebuckleasshownuntil |
| you achieve the desired |
| length. |
Figure 14: Using the Optional Shoulder Strap
27
MZ Series User Guide
