Loading the Media (All models)
1. Open the printer: Refer to Figure 6.
•Press the latch release button on the top of the printer as shown at “1” below. The media cover will flip open auto- matically revealing the media compartment.
2. Load the media: Refer to Figure 7
•Insert the roll of media into the media compartment. Ensure that the media pulls off the core in the direction shown in Figure 6.
3. Close the Media Cover: Refer to Figure 8.
•Pull a short length of media out of the printer
•Close the Media Cover firmly and ensure it is securely latched on both sides..
•Turn on the printer and press the Feed button.
The printer will advance media until the Feed button is re- leased. Verify the media is feeding properly and without binding or skewing sideways.
Figure 6: Opening the MZ Printer (MZ 220 shown)
Latch Release |
Button |
Media Compartment |
continued |
16 |
MZ Series User Guide
