Figure 2.2: Removing the Battery
1.Use a coin to rotate the Battery Compartment lock 1/4 turn as shown.
2.Remove the Battery Compartment Cover
Battery Pack
Connector
Squeeze lock to release beforeunpluggingconnector.
Lift Battery pack free from 
the printer.
Always release the locking barb before unplugging the battery connector. Do not attempt to remove the connector by force, or by using pliers, etc. as this could cause damage to the printer’s CPU assembly.
4. Install a replacement battery by following the procedure described in Figure 2.1
11
MZ Series User Guide
