1.Removethepowersup- 2. Verify that the mains adapter
ply from its box. Remove shippedwithyourPrinteristhecorrect and discard the shipping one for your region. ringfromthemainsrecep-
tacle cavity.US/Japan-100-110 VAC UK -230 VAC China-220 VAC
Euro -230 VAC
When the battery is first installed, the printer power and charge indicators should indicate the battery is not fully charged (see “Charging the Battery” below and “Operator Controls”).
You must charge the battery fully before using the printer for the first time.
Charging the Battery
Preparing the Charger Power Supply
Before charging the battery for the first time, you must pre- pare the Charger Power Supply. Refer to Figure 3 below:
Figure 3: Preparing the Charger Power Supply
Shipping Ring
Remove and discard
Mains Adapter 
3.Installthemainsadapterinto the Power Supply by hooking
the top edge into the mains receptacle cavity, and rotating it until it snaps into place.
continued
12
MZ Series User Guide
