Operator Controls
MZ series printer controls are detailed below and in Figure 9. The printer has two control buttons and four multipurpose
indicators.
The Power Button turns the printer on and off.
The Feed Button advances a length of media until it is re- leased.
The Green/Amber indicator to the left of the Power Button indicates the status of the printer’s
•The indicator is off indicates the battery is not being charged.
•If the indicator is amber the battery is being charged.
•If the indicator is green, the battery is fully charged. The Green Indicator between the Power and Feed buttons
has two states:
•A rapidly blinking light indicates a low battery condition.
•A steadily lit indicator means that power is on and the battery charge level is sufficient for use
The Amber Indicator to the right of the Feed button is an er- ror indicator.
•An
•A blinking indicator could mean one of two conditions ex- ist, which will inhibit printer operation:
1.There is no media loaded.
2.The media cover is open.
3.If both the above conditions are met and the error light is still flashing, there could be no application load-
ed in the printer, or the application could have become corrupted.
The Blue Indicator just above the product I.D. label is a com- munications indicator. Its functions vary depending on the wireless communications option installed in the printer.
•If the printer uses only standard IrDA® wireless commu- nication:
A blinking light indicates data is being received from a linked IrDA device.
•If the printer has a Bluetooth™ radio option:
1.A steady light indicates the printer has paired with an-
19
MZ Series User Guide
