Zebra Technologies UMAN-MZA-007 manual Approximate Charge Times

Figure 4: Charging the Battery

MZ Series Charger Power Supply p/n AT17947-1

110-240 VAC 50-60 Hz 0.6A Input; 12 VDC 1.25 A output Plug into AC receptacle

Charger Jack

12 VDC

Charging the battery

Refer to Figure 4.

1.Plug the Charger Power Supply into the appropriate A.C. wall receptacle. Then insert the charge cable into the printer’s charger jack.

2.The printer’s charger indicator will indicate the status of the charger as follows:

•An amber light indicates the battery is charging, and that the battery is less than 90% charged.

•A green light indicates the battery is fully charged. The battery is ready for use.

Approximate Charge Times :

Batteries are fully charged after 2.5 hours from the low-bat- tery shut-off state. Partially discharged batteries will take less time to charge.

NOTES: Use of the printer while charging will increase charge times. Charge times are for completely discharged batteries.

As a safety feature the battery will stop charging after 4.5 hours regardless of the battery’s charge state.

13

MZ Series User Guide