Customizing the telephone

Changing general settings

Redial every x seconds

When you activate automatic redial (p. 23) : you set here the time that elapses before your telephone redials automatically.

Press the "Menu" function key.

Scroll to the Settings menu item.

Confirm your selection.

Scroll to the Dial settings menu item.

Confirm your selection.

Scroll to the Redial every menu item. The currently specified time interval bet- ween two redials is shown in brakkets.

If necessary, press several times to select the desired time interval between redials.

Exit menu. The new setting is saved.

i

• You can select times of 15, 30, 60, 90 or 120 seconds.

Automatic handsfree when called

If you switch on this function, your telephone automatically accepts all internal calls. On receiving a call, you hear a short attention tone and you can then speak in hands- free mode to the caller immediately without pressing any key and without picking up the receiver.

Press the "Menu" function key.

Scroll to the Settings menu item.

Confirm your selection.

Scroll to the Dial settings menu item.

Confirm your selection.

Scroll to the Handsfree answ-backmenu item. An indication on the right hand side of the window shows whether the function is on or off.

Switch the function on or off. The new status is displayed.

Exit menu. The new setting is saved and a status message appears.

i

• When your caller terminates the call, a new call can be taken immediately.

79

Page 79
Image 79
Avaya T3 (IP) Compact manual Redial every x seconds, Automatic handsfree when called