/HDYLQJ￿WKH￿6HWXS￿0RGH￿

You can leave the program mode at any time by pressing the SETUP/EXIT key. The “SAVE CHANGES” display appears. There are five choices, as described below. Pressing the LEFT or RIGHT BLACK OVAL key displays other choices and pressing the NEXT/SAVE key selects the displayed choice.

•PERMANENT — Permanently saves the changes. Values are stored in the printer even when power is turned off.

•TEMPORARY — Saves the changes until you change them again or until power is turned off.

•CANCEL — Cancels all changes from the time you pressed the SETUP/EXIT key except the darkness and tear-off settings (if they were changed).

•LOAD DEFAULTS — Loads factory defaults. The factory defaults are shown on the following pages.

NOTE: Loading factory defaults requires printer calibration.

• LOAD LAST SAVE — Loads values from the last permanent save.

Zebra XiIII-Series User’s Guide

43