Press | Display Shows | Action/Explanation |
|
| Setting the Applicator Port: Press the RIGHT or LEFT |
|
| BLACK OVAL key to display other choices. |
|
| Default: Off |
|
| Selections: Off, mode 1, mode 2, mode 3, mode 4 |
|
| Determines the action of the verifier port. |
|
| • Off: The applicator port is off. |
|
| • Mode 1: Asserts the ~END_PRINT signal low while the |
| APPLICATOR PORT | printer is moving the label forward. |
|
| • Mode 2: Asserts the ~END_PRINT signal high while the |
|
| printer is moving the label forward. |
|
| • Mode 3: Asserts the ~END_PRINT signal low for 20 |
|
| milliseconds when a label has been completed and |
|
| positioned. Not asserted during continuous printing modes. |
|
| • Mode 4: Asserts the ~END_PRINT signal high for 20 |
|
| milliseconds when a label has been completed and |
|
| positioned. Not asserted during continuous printing modes. |
|
| NOTE: Set as suggested by the applicator manufacturer. |
|
|
|
| WEB S. |
|
|
|
|
| MEDIA S. |
|
|
|
|
| RIBBON S. |
|
|
| These parameters are automatically set during the calibration |
|
| |
| MARK S. | procedure. They should only be changed by a qualified service |
|
| technician. Refer to the maintenance manual for more |
|
| information on these parameters. |
|
| |
| MARK MED S. | Press the NEXT/SAVE key repeatedly to skip these |
| parameters. | |
|
| |
|
|
|
| MEDIA LED |
|
|
|
|
| RIBBON LED |
|
|
|
|
| MARK LED |
|
|
|
|
58 | Zebra |