&RQILJXUDWLRQDQG&DOLEUDWLRQ6HTXHQFH
Press | Display Shows | Action/Explanation |
— | PRINTER READY | Normal printer operation. |
|
|
|
Setting Print Parameters |
| |
|
|
|
|
| Adjusting Print Darkness: Press the RIGHT BLACK OVAL key |
|
| to increase darkness. Press the LEFT BLACK OVAL key to |
|
| decrease darkness. |
|
| Default: +10 |
|
| Range: 0 to +30 |
|
| Darkness settings are dependent upon a variety of factors |
|
| including ribbon type, media, and the condition of the printhead. |
|
| You may adjust the darkness for consistent |
|
| If printing is too light, or if there are voids in printed areas, you |
|
| should increase the darkness. If printing is too dark, or if there is |
| DARKNESS | spreading or bleeding of printed areas, you should decrease the |
|
| darkness. |
|
| The FEED Key Self Test on page 84 can also be used to |
|
| determine the best darkness setting. Since the darkness setting |
|
| takes effect immediately, you can see the results on labels that |
|
| are currently printing. |
|
| CAUTION: Set the darkness to the lowest setting that provides |
|
| good print quality. Darkness set too high may cause |
|
| ink smearing and/or it may burn through the ribbon. |
|
| Darkness settings also may be changed by the driver or software |
|
| settings. |
|
|
|
|
| Adjusting the |
|
| OVAL key to increase the value, press the LEFT BLACK OVAL |
|
| key to decrease the value. Each press of the key adjusts the tear- |
| TEAR OFF | off position by four dot rows. |
|
| Default: +0 |
|
| Range: |
|
| This parameter establishes the position of the media over the |
|
| |
|
|
|
|
| Selecting Print Mode: Press the RIGHT or LEFT BLACK OVAL |
|
| key to display other choices. |
|
| Default: |
| PRINT MODE | Selections: |
|
| Print mode settings tell the printer the method of media delivery |
|
| that you wish to use. Be sure to select a print mode that your |
|
| hardware configuration supports since some selections displayed |
|
| are for optional printer features. |
|
|
|
44 | Zebra |