Press | Display Shows | Action/Explanation |
|
| Setting Parity: Press the RIGHT or LEFT BLACK OVAL key to |
|
| display other choices. |
|
| Default: Even |
| PARITY | Selections: Even, odd, none |
|
| The parity of the printer must match the parity of the host |
|
| computer for accurate communications to take place. Select the |
|
| parity that matches the one being used by the host computer. |
|
|
|
|
| Setting Stop Bits: Press the RIGHT or LEFT BLACK OVAL key |
|
| to display other choices. |
| STOP BITS | Default: 1 stop bit |
|
| Selections: 1 stop bit, 2 stop bits |
|
| The stop bits of the printer must match the stop bits of the host |
|
| computer for accurate communications to take place. Select the |
|
| stop bits that match the one being used by the host computer. |
|
|
|
|
| Setting Host Handshake: Press the RIGHT or LEFT BLACK |
|
| OVAL key to display other choices. |
|
| Default: XON/XOFF |
| HOST HANDSHAKE | Selections: XON/XOFF, DTR/DSR |
|
| The handshake protocol of the printer must match the handshake |
|
| protocol of the host computer for proper communications to take |
|
| place. Select the handshake protocol that matches the one being |
|
| used by the host computer. |
|
|
|
|
| Setting Protocol: Press the RIGHT or LEFT BLACK OVAL key |
|
| to display other choices. |
|
| Default: None |
|
| Selections: None, Zebra, ACK/NACK |
|
| Protocol is a type of error checking system. Depending on the |
| PROTOCOL | selection, an indicator may be sent from the printer to the host |
|
| computer signifying that data has been received. Select the |
|
| protocol that is requested by the host computer. Further details |
|
| on protocol can be found in the ZPL II Programming Guide. |
|
| NOTE: Zebra is the same as ACK/NACK except that with Zebra |
|
| the response messages are sequenced. |
|
| If Zebra is selected, printer must use “DTR/DSR” host |
|
| handshake protocol. |
|
|
|
52 | Zebra |