Press | Display | Action/Explanation |
| Shows |
|
|
| IP Resolution: Press the RIGHT or LEFT BLACK OVAL key to |
|
| display other choices. |
|
| Default: Dynamic |
| IP RESOLUTION* | Selections: Dynamic, permanent |
|
| Depending on the selection, allows either the user (”permanent”) or |
|
| the server (”dynamic”) to select the IP address. For more |
|
| information, refer to ZebraNet Networking: PrintServer II Installation |
|
| and User’s Guide. |
|
|
|
|
| IP Protocols: Press the RIGHT or LEFT BLACK OVAL key to |
|
| display other choices. |
|
| Default: All |
|
| Selections: All, gleaning only, RARP, BOOTP, DHCP, |
| IP PROTOCOLS* | DHCP/BOOTP |
|
| If “dynamic” was chosen in the previous parameter, this selection |
|
| determines the method(s) by which the PrintServer II receives the |
|
| IP address from the server. For more information, refer to ZebraNet |
|
| Networking: PrintServer II Installation and User’s Guide. |
|
|
|
|
| IP Address: Press the LEFT BLACK OVAL key to move to the next |
|
| digit position, press the RIGHT BLACK OVAL key to increase the |
|
| value of the digit. |
| IP ADDRESS* | This parameter allows you to select the IP address if “permanent” |
|
| was chosen in “IP RESOLUTION.” (If “dynamic” was chosen, the |
|
| user cannot select the address.) For more information, refer to |
|
| ZebraNet Networking: PrintServer II Installation and User’s Guide. |
|
|
|
|
| Subnet Mask: Press the RIGHT or LEFT BLACK OVAL key to |
|
| display other choices. |
|
| Default: Permanent (user must set) |
| SUBNET MASK* | Selections: Dynamic (user may set, but server can assign), |
|
| permanent |
|
| This parameter selects the part of the IP address that is considered |
|
| to be part of the local network. It can be reached without going |
|
| through the default gateway. |
|
|
|
|
| Default Gateway: Press the LEFT BLACK OVAL key to move to |
|
| the next digit position, press the RIGHT BLACK OVAL key to |
| DEFAULT | increase the value of the digit. |
| GATEWAY* | This parameter allows you to select the IP address that the network |
|
| traffic is routed through if the destination address is not part of the |
|
| local network. |
|
|
|
* ZebraNet® PrintServer II option required
Zebra | 61 |