Zebra Technologies XiIII Series manual 99

0HGLD￿6SHFLILFDWLRQV

Media Specifications			90/96XiIII	140XiIII	170XiIII	220XiIII
		Tear-off	0.7" (18 mm)	0.7" (18 mm)	0.7" (18 mm)	0.7" (18 mm)
Minimum label length*		Peel-off	0.5" (13 mm)	0.5" (13 mm)	0.5" (13 mm)	0.5" (13 mm)
		Cutter	1.5" (38 mm)	1.5" (38 mm)	1.5" (38 mm)	1.5" (38 mm)
		Rewind	0.25" (6 mm)	0.25" (6 mm)	0.25" (6 mm)	0.25" (6 mm)
		Minimum	0.79" (20 mm)	1.57" (40 mm)	2.00" (51 mm)	4.25" (108 mm)
Total media width (label + liner, if any)
		Maximum	3.54 mm	5.51 mm	7.1 mm	8.80 mm
			(90 mm)	(140 mm)	(180 mm)	(224 mm)
		Minimum	0.003"	0.003"	0.003"	0.003"
			(0.076 mm)	(0.076 mm)	(0.076 mm)	(0.076 mm)
Total thickness (includes liner, if any)
		Maximum	0.012"	0.012"	0.012"	0.012"
			(0.305 mm)	(0.305 mm)	(0.305 mm)	(0.305 mm)
Cutter maximum full-width media thickness			0.014" (0.35 mm)	0.009" (0.23 mm)	0.007" (0.18 mm)	0.005" (0.14 mm)
Roll media core inside diameter			3" (76 mm)	3" (76 mm)	3" (76 mm)	3" (76 mm)
Maximum roll diameter			8.0" (203 mm)	8.0" (203 mm)	8.0" (203 mm)	8.0" (203 mm)
		Minimum	0.079" (2 mm)	0.079" (2 mm)	0.079" (2 mm)	0.079" (2 mm)
Inter-label gap		Preferred	0.118" (3 mm)	0.118" (3 mm)	0.118" (3 mm)	0.118" (3 mm)
		Maximum		Maximum inter-label gap =
			2 x (label length for which you have calibrated the printer) + 1"
Maximum internal fanfold media pack size (label + liner)			8.0" x 4.5 " x 4.5"	8.0"x 5.5" x 4.5"	8.0" x 7.1" x 4.5"	8.0" x 8.8" x 4.5"
L x W x H			(203 mm x	(203 mm x	(203 mm x	(203 mm x
			114 mm x	140 mm x	180 mm x	224 mm x
			114 mm)	114 mm)	114 mm)	114 mm)
Ticket/tag sensing notch L x W			0.12" x 0.25"	0.12" x0.25"	0.12" x 0.25"	0.12" x0.25"
			(3 mm) x (6 mm)	(3 mm) x (6 mm)	(3 mm) x (6 mm)	(3 mm) x 6 mm)
Ticket/tag sensing hole diameter			0.125" (3 mm)	0.125" (3 mm)	0.125" (3 mm)	0.125" (3 mm)
		Vertical	± 0.060"	± 0.070"	± 0.060"	± 0.050”"
Effective leading edge registration			(±1.5 mm)	(±1.8 mm)	(±1.5 mm)	(±1.3 mm)
accuracy*
		Horizontal	± 0.060"	± 0.070"	± 0.060"	± 0.060"
			(±1.5 mm)	(±1.8 mm)	(±1.5 mm)	(±1.5 mm)
	Mark length	Minimum	0.12" (3 mm)	0.12" (3 mm)	0.12" (3 mm)	0.12" (3 mm)
	(measuring parallel
		Maximum	0.43" (11 mm)	0.43" (11 mm)	0.43" (11 mm)	0.43" (11 mm)
	to label/tag edge)
	Mark width	Minimum	0.43" (11 mm)	0.43" (11 mm)	0.43" (11 mm)	0.43" (11 mm)
	(measuring to
		Maximum	Full media width	Full media width	Full media width	Full media width
	perpendicular label/
Additional
	tag edge)
specifications for
black mark sensing	Mark location		Marks must be located within 0.040" (1 mm) of the inside media edge.
	Mark density		>1.0 Optical	>1.0 Optical	>1.0 Optical	>1.0 Optical
			Density Unit	Density Unit	Density Unit	Density Unit
			(ODU)	(ODU)	(ODU)	(ODU)
	Maximum density of the back of the		0.5 ODU	0.5 ODU	0.5 ODU	0.5 ODU
	media on which the black mark is
	printed

*Media registration and minimum label length are affected by media type and width, ribbon type, print speed, and printer mode of operation. Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing.

Zebra XiIII-Series User’s Guide 91