Zebra Technologies XiIII Series 7RJJOH￿3RVLWLRQLQJ

$GMXVWPHQWV

7RJJOH￿3RVLWLRQLQJ

Both toggles should be positioned so that they provide even pressure on the media. The toggles are positioned by sliding them to the desired location. On media too narrow to accommodate both toggles, position one toggle over the center of the media and decrease the pressure on the unused toggle. If you are using a 90 or 96XiIII printer, position the single toggle over the center of the media.

NOTE: Make sure that the toggle pressure is even across the width of the

media. Otherwise, the media and/or ribbon may “drift.”

Figure 32

Zebra XiIII-Series User’s Guide 73