Color profile: Disabled

Composite Default screen

sensor anywhere under the media so that an “Out-of-Media” condition will still be sensed.

5.Insure the media and ribbon are properly positioned within the print mechanism. then close the Printhead Assembly.

6.Close the printer’s media cover, then turn the printer power OFF.

o

p

Figure 6. Sensor Positioning

Printer Operational Check

1.To insure proper setup and to check the initial printer configura- tion, press and hold the CANCEL key while turning the printer power ON. (Release the CANCEL key once the front panel indica- tors begin to turn OFF.)

2.After an initial time period when the Power ON Self Test is per- formed, the printer will feed out media while calibrating the label length, then print a configuration label.

3.Check the current configuration printed on the label and note any parameters which must be changed to insure the printer fits your application. For information on changing the configuration for your specific application, refer to Appendix A.

A visual check of the label also provides an indication of the print qual- ity. Media width and media thickness vary from one application to the

10

Z Series™ User’s Guide

18

H:...uspiran2.vp

Thu Jun 18 15:54:04 1998