Color profile: Disabled
Composite Default screen
COMMUNICATIONS
PARAMETER |
| SELECTIONS | |
NETWORK ID | The network ID is used to assign a unique number to | ||
(password | a printer used in a network. This gives the host the | ||
required) | means to address a specific printer. | ||
| Default: 000 | Choices: 000 to 999 | |
| NOTE: If the printer is used in a network, you must | ||
| select a network ID number | ||
COMMUNICATIONS | The communications diagnostics mode is a trouble- | ||
(password | shooting tool for checking the interconnection | ||
required) | between the printer and the host. When “Di agnostics“ | ||
| is selected, all data sent from the host to the printer | ||
| will be printed as straight ASCII hex characters. All | ||
| received characters, including control codes like CR | ||
| (Carriage Return), are printed. | ||
| Default: Normal Mode | ||
| Choices: Normal Mode or Diagnostics Mode | ||
| NOTES: An FE indicates a framing error. | ||
| An OE indicates an overrun error. | ||
| An PE indicates a parity error. | ||
| An NE indicates noise. | ||
| If errors are indicated, check that your | ||
| communication parameters are correct. | ||
|
|
| |
| PRINT LISTINGS |
| |
|
|
|
|
PARAMETER |
| SELECTIONS |
|
LIST FONTS | Press “+” to print a list of all standard and optional |
| |
| fonts currently available in the printer. |
| |
LIST BARCODES | Press “+” to print a list of all the barcodes currently |
| |
| available in the printer. |
| |
LIST IMAGES | Press “+” to print a list of all the images currently |
| |
| available in the printer. |
| |
LIST FORMATS | Press “+” to print a list of all the formats currently |
| |
| available in the printer. |
| |
LIST SETUP | Press “+” to print the printer’s current configuration. |
| |
LIST ALL | Press “+” to print all of the previously indicated lists. |
| |
|
|
|
|
Continued on the following page.
Z Series™ User’s Guide | 65 |
73 |
|
H:...uspiran2.vp
Thu Jun 18 16:03:36 1998