Color profile: Disabled

Composite Default screen

Cutter Option

The Z Series™ printer also features a cutter option. This option is available as both a factory installed feature and a field installable kit. A label catch tray is included which holds up to 10 labels up to 6” in length.

Label Movement in Cutter Mode

When the label is completely printed, the printer feeds the media into the cutter mechanism. The cutter blade is activated and the printer waits for the cutter mechanism to complete its cycle. After cutting, the printer backfeeds the media to the rest position or to the start of the next label if another label is in the print queue. If the cut cycle is not completed, the printer automatically stops the print cycle and turns the ERROR LED ON. This will normally identify a cutter jam.

Refer to Appendix A for information on configuring the printer for the

Cutter mode of operation.

Media Loading

Refer to Figure 18 while loading media.

1.Place the roll of media on the Media Supply Hanger(i) and push it on all the way.

2.Fold the Media Supply Guide(g) up and slide it against the outer edge of the media roll.

3.Press the Printhead Open Lever(e) and raise the Printhead Assembly.

g

k

i

h j e

Figure 18. Media Loading (Cutter Option)

32

Z Series™ User’s Guide

40

H:...uspiran2.vp

Wed Jul 08 11:39:02 1998