Operating Modes

Use the Bank Two (right) switches to select printer operating modes. When shipped from the factory, all switches are in the ON position. This presets the printer to match the most commonly used modes of operation - Tear-Off Mode, Non-continuous Media, Thermal Transfer Operation, and RS-232 Serial Communications.

If your printer is equipped with an option such as rewind, peel-off, or cutter, or if your application requires a different operating mode such as direct thermal, or continuous media, refer to Table 9 for the appropriate Bank Two switch settings.

 

DIP SWITCH/ZPL CONTROL

SWITCH 1

 

Dip Switches 2 - 6 Override ZPL

ON

ON

ZPL Overrides Dip Switches 2 - 6

 

 

 

a parallel communications

. The Bank One switches and on parallel communications.

perform the CANCEL section for more details.

Guide

59