Color profile: Disabled

Composite Default screen

Make sure that your print width is set correctly for the media you are using before you run any self-tests, otherwise the test may print out on the platen. If your media is not wide enough or long enough to display a complete test label, unexpected and/or undesired results may occur.

When performing these self-tests while in the Peel Mode, you must remove the labels as they become available.

CANCEL Key Self-test

Press and hold the CANCEL key while turning the printer power ON.

Release the key anytime after the first front panel LED turns OFF.

The CANCEL key self-test prints a configuration label showing:

n

Printer configuration

n

Installed options

n

Software version

n

Copyright notice

Figure 19 shows an example of the Printer Configuration Label. The configuration information will print over several labels if a label is not long enough to display all of the configuration information at one time.

Figure 19. CANCEL Key Self-test Label

 

Z Series™ User’s Guide

41

49

 

H:...uspiran2.vp

Thu Jun 18 16:02:06 1998