Color profile: Disabled
Composite Default screen
| CALIBRATION | |
|
| |
PARAMETER | SELECTIONS | |
MEDIA POWER UP | This parameter establishes the action of the media | |
(password | when the printer is turned ON. | |
required) |
| |
| Default: Calibration | |
| Choices: Calibration - recalibrates media and ribbon | |
| sensors by feeding labels | |
| Feed - feeds the label to the first web | |
| Length - determines the length of the label | |
| by feeding labels | |
| No Motion - media does not move | |
|
| |
HEAD CLOSE | This parameter establishes the action of the media | |
(password | after the printhead has been opened and then | |
required) | closed. | |
| Default: Calibration | |
| Choices: Calibration - recalibrates media and ribbon | |
| sensors by feeding labels | |
| Feed - feeds the label to the first web | |
| Length - determines the length of the label | |
| by feeding labels | |
| No Motion - media does not move | |
|
| |
MANUAL CALIBRATE | If the | |
| ZPL command from the host or the HEAD CLOSE | |
| parameter is not “Calibrate”, you may use this | |
| feature to calibrate the media and ribbon sensors. | |
| Press “+” to enable the Calibration process. | |
| NOTE: If the printer is configured for continuous | |
| media, no media movement will occur during | |
| the Calibration process. | |
|
| |
SENSOR PROFILE | The Media and Ribbon Sensor Profile provides a | |
| graphical representation of the Media and Ribbon | |
| Sensor settings as an aid to the Service Technician if | |
| problems with | |
| Press “+” to enable the Sensor Profile printout. | |
|
| |
WEB S. |
| |
| THESE SETTINGS SHOULD ONLY BE CHANGED | |
MEDIA S. | ||
BY AN AUTHORIZED SERVICE TECHNICIAN. | ||
| ||
RIBBON S. | (A password is required) | |
| ||
|
| |
MEDIA LED | Refer to the Z Series Maintenance Manual for | |
| additional information about these settings. | |
RIBBON LED | ||
| ||
|
| |
Continued on the following page. | ||
Z Series™ User’s Guide | 67 |
75 |
|
H:...uspiran2.vp
Thu Jun 18 16:03:36 1998