Color profile: Disabled

Composite Default screen

FEED Key Self-test

Press and hold the FEED key while turning the printer power ON. Release the key anytime after the first front panel LED turns OFF.

The quantity of labels printed during this print quality test depends on the dot density of the printhead.

n300 dpi printers: 7 labels are printed at the 2 ips and 6 ips print speeds.

n200 dpi printers: 7 labels are printed at the 2 ips, 6 ips and 10 ips print speeds.

Each label is printed at a different darkness setting, starting at three settings below the currently configured value and continuing to increase until it is three settings darker than the configured value. The relative darkness and speed are printed on each label. The bar codes on these labels can be ANSI-graded to check print quality.

Figure 21 provides an example of the FEED key self-test label.

Figure 21. FEED Key Self-Test Label

 

Z Series™ User’s Guide

43

51

 

H:...uspiran2.vp

Thu Jun 18 16:02:07 1998