ZyXEL Communications 2000W manual Profiles, WEP for encryption, not for authentication

Models: 2000W

1 127
Download 127 pages 47.74 Kb
Page 36
Image 36

Prestige 2000W_V2 User’s Guide

Note: Only set the authentication type to shared key if the wireless clients are required to send the WEP key to the AP for authentication (not just for encryption). Many networks use an open system where you would only use

WEP for encryption, not for authentication.

1Select Wireless in the first menu screen (use the up or down arrow to highlight it and then press the Left key).

2Use the up or down arrow and the Left key to select Auth Type.

3Select Shared Key if the wireless clients need to send the WEP key to the AP for authentication.

Select Open System if the wireless clients do not need to send the WEP key to the AP for authentication.

4The Prestige restarts when you return to the main screen.

7.Wireless

8.Restart

1.Information

SelectBack

8.Auth Type

1.Site Survey

2.SSID

SelectBack

[2]Shared Key

[1]Open System

SelectBack

3.8 Profiles

Use a profile to save your wireless settings for future use.

1Select Wireless in the first menu screen (use the up or down arrow to highlight it and then press the Left key).

2Use the up or down arrow and the Left key to select Profiles.

7.Wireless

8.Restart

1.Information

SelectBack

7.Profiles

8.Auth Type

1.Site Survey

SelectBack

36

Chapter 3 Wireless LAN Setup Menus

Page 36
Image 36
ZyXEL Communications 2000W manual Profiles, WEP for encryption, not for authentication