Prestige 2000W_V2 User’s Guide

5Use the left arrow button to clear the IP address. Use the up and down arrows to select the type of characters. Enter your IP address. Use the Left key to select Ok when you are done.

6Select Subnet Mask.

7Clear the subnet mask and enter your’s.The subnet mask specifies the network number portion of an IP address. Type the subnet mask given to you by your network administrator. See the appendix for information on subnetting.

8Select Gateway.

9Clear the gateway IP address and enter your’s.

IP Address 192.168.1.3

Ok Aa1@ Clear

3.Subnet Mask

4.Gateway

1.Network Mode

SelectBack

Subnet Mask 255.255.255.0

Ok Aa1@ Clear

4.Gateway

1.Network Mode

2.IP Address

Select Back

Gateway 192.168.1.1

Ok Aa1@ Clear

4.2 DHCP

If you were not assigned a specific IP address for your Prestige, use the following directions to set your Prestige to get it automatically via DHCP (Dynamic Host Control Protocol).

1Select Net Settings in the first menu screen (use the up or down arrow to highlight it and then press the Left key).

4.Net Settings

5.SIP Settings

6.Settings

SelectBack

40

Chapter 4 Network Settings

Page 40
Image 40
ZyXEL Communications 2000W manual Dhcp, Select Subnet Mask