ZyXEL Communications 2000W manual Using the Web Configurator Screens, Accounts, Login

Models: 2000W

1 127
Download 127 pages 47.74 Kb
Page 67
Image 67

Prestige 2000W_V2 User’s Guide

CH A P T E R 11

Using the Web Configurator Screens

This chapter describes how to use the Prestige’s web configurator to view and configure the Prestige’s settings.

11.1 Introduction to the Web Configurator

The embedded web configurator allows you to configure or view the Prestige’s settings through Microsoft Internet Explorer. Use Internet Explorer 6.0 and later versions.

It is recommended that you set your screen resolution to 1024 by 768 pixels.

11.2 Accounts

The Prestige has two pre-configured accounts to access the web configurator. The first is the user account that lets you configure the Prestige’s basic settings. The second is an administrator’s account that allows you to alter the way the Prestige makes and receives calls, for example selecting a voice codec.

Note: Do not attempt to change the administrator settings unless you know what you are doing. These settings affect the way your Prestige makes and receives calls and are already configured for best performance.

11.2.1Login

1Make sure your Prestige is connected to the wireless LAN and record its IP address (you can use the Information menu to check your phone’s IP address).

2Launch your web browser.

3Type "http://<IP address>" as the URL (where “IP address” is the Prestige’s IP address).

Figure 8 Browser Address

4Enter your user name and password and click OK to login.

Chapter 11 Using the Web Configurator Screens

67

Page 67
Image 67
ZyXEL Communications 2000W manual Using the Web Configurator Screens, Introduction to the Web Configurator, Accounts, Login