COMMAND CENTER Pages
Item | Description |
|
|
POP3 Server | Enter the timeout in seconds during which this machine tries |
Timeout | to connect to the POP3 server. |
|
|
Login User | Enter the login name of the user. |
Name |
|
|
|
Login | Enter the password for connecting to the user name above. |
Password |
|
|
|
Use APOP | Enables or disables APOP. |
|
|
Test | This will test one transmission for each press. |
|
|
Delete | Enables or disables the Delete |
after retrieval |
|
|
|
Enter maximum | |
| the limitation for |
|
|
Cover Page | Specifies whether to print the body of |
| attached files. |
| When this item is set to On, the attached files and the body |
| of |
| When no attached files exist, only the body of |
| When this item is set to Off, only the attached files are printed. |
| When no attached files exist, nothing is printed. |
|
|
Advanced > Management > SNMP > SNMPv1/v2c
The SNMP protocol is used for providing and transferring management information within the network environment. Should an error occur such as Add Paper, the printing system automatically generates a trap, an error message sent to up to two pre- determined trap recipients.
Item | Description |
|
|
SNMPv1/v2c | Sets whether to use the SNMPv1/v2c protocol. Set On to use |
| it. After you have changed this setting, you must restart this |
| machine. |
Read Community
The read community can be used like a password. The default read community name is public. After you have changed this setting, you must restart this machine. When a management application sends an SNMP request to read a value, it must include the correct read community name or the request will be rejected by the printing system.
Write Community
Similar in function to the read community, but used in SNMP requests to write (change) a value.The default write community name is public. After you have changed this setting, you must restart this machine.
sysContact | The |
| the network administrator. |
|
|
42 | KYOCERA COMMAND CENTER |