|
| COMMAND CENTER Pages | |
|
|
|
|
|
|
|
|
| Item | Description | |
|
|
|
|
| Lifetime | Specifies whether the lifetime is measured by time or by time | |
| Measure- | and data size. | |
| ment |
|
|
|
|
|
|
| Lifetime | Specifies the lifetime of an IPSec SA. Lifetime Measurement | |
| (Time)/ | allows you to select whether to use time or data size to specify | |
| Lifetime | the lifetime. When you select Time & Data Size, an SA is | |
| (Data | disabled and updated when either the time or data size of the | |
| Size) | SA exceeds the specified value. | |
|
|
|
|
| IP Version | Specifies the IP version of the other end. Select IPv4 or IPv6. | |
|
|
|
|
| IP | Specifies the IPv4 addresses of the hosts or network with | |
| Address | which the print system is connecting via IPSec. When you are | |
| (IPv4) | restricting the scope of IPSec, be sure to specify the IP | |
|
| addresses. If this field is blank, all IPv4 addresses will be | |
|
| allowed to connect the print system. | |
|
|
|
|
| IP | Specifies the IPv6 addresses of the hosts or network with | |
| Address | which the print system is connecting via IPSec. When you are | |
| (IPv6) | restricting the scope of IPSec, be sure to specify the IP | |
|
| addresses. If this field is blank, all IPv6 addresses will be | |
|
| allowed to connect the print system. |
Subnet
Mask
When IPv4 is selected for IP Version, this specifies the subnet mask of the hosts or network with which the print system is connecting via IPSec. If this field is blank, the specified addresses are considered to be host addresses.
Prefix Length
When IPv6 is selected for IP Version, this specifies the prefix length of the hosts or network with which the print system is connecting via IPSec. If this field is blank, the specified addresses are considered to be host addresses.
Operation Guide | 49 |