Kyocera Multifunctional Printer manual Description, Network, General, Snmp

	COMMAND CENTER Pages
Item	Description
Network >	This allows you to verify the current settings for LDAP, TCP/
General	IP, IPP, IPP over SSL, AppleTalk, NetBEUI, IPv4, and IPv6.
	For more information, refer to Advanced Page on page 33.

Network > IP Filters

This displays the list of IP addresses and subnet masks (IPv4) or prefix length (IPv6) that have access permission as set under IP Filters (IPv4) and IP Filters (IPv6) on the Advanced page. If no IP addresses have been designated, then access permission will be granted to all addresses. For more information, refer to Advanced > Protocols > TCP/ IP > IP Filters on page 35.

Network >

SNMP

This allows you to verify the settings made under SNMPv1/ v2 and SNMPv3 on the Advanced page.

For more information on SNMPv1/v2, refer to Advanced > Management > SNMP > SNMPv1/v2c on page 42.

For more information on SNMPv3, refer to Advanced > Management > SNMP > SNMPv3 on page 43

Network > POP3/SMTP

This allows you to verify the E-mail-related settings made on POP3 and SMTP pages of the Advanced page.

For more information on POP3, refer to Advanced > E-mail > POP3 > General on page 41.

For more information on SMTP, refer to Advanced > E-mail > SMTP > General on page 39.

Network > Logical Printers

This allows you to verify the settings made on the Logical Printers page of the Advanced page.

For more information, refer to Advanced > Protocols > TCP/ IP > Logical Printers on page 36.

Network > Netware

This allows you to verify the settings made on the Netware page of the Advanced page.

For more information, refer to Advanced > Protocols > Netware on page 37.

Security	This allows you to verify the current settings for secure
	protocols, IEEE802.1x, and IPSec. To change the settings:
	For secure protocols, refer to Advanced > Security > Secure
	Protocols on page 46; For IEEE802.1x, refer to Advanced >
	Security > IEEE802.1x on page 46; For IPSec, refer to
	Advanced > Security > IPSec > Rule1 (to Rule3) on page 48.
Device/Printer	This allows you to verify the settings made on the Basic and
	the Printer pages.
	For more information, refer to Basic Page on page 7 and
	Printer Page on page 15.
Device/Printer >	This allows you to verify the settings made on the Basic and
APL. Filter	the Printer pages.
	For more information, refer to Printer Page on page 15.
Device/Printer >	This allows you to verify the settings made on the Basic and
APL. Filter	the Printer pages.
Parameters	For more information, refer to Printer Page on page 15.
Scanner	This allows you to verify the settings made on the Scanner
	page.
	For more information, refer to Scanner Page on page 18.

Operation Guide 5