COMMAND CENTER Pages
Advanced > Protocols > TCP/IP > General
The table below provides a summary of the items displayed on the TCP/IP > General page.
Item | Description |
|
|
Host Name | Specifies a name for the printing system network component. |
| This name is also used as the NetBEUI printer name. |
|
|
IPv4 Settings | Specifies whether or not to automatically obtain an IP |
DHCP/ | address using DHCP or BOOTP. |
BOOTP |
|
IP Address
Assigns an IPv4 address to the printing system network component. The format of the IPv4 address is a sequence of numbers
Subnet | Specifies the subnet mask. |
Mask |
|
|
|
Default | Specifies the IP address of the default gateway. |
Gateway |
|
|
|
Domain | Specifies the DNS (Domain Name System) name of the |
Name | domain to which the printing system belongs. It should not |
| contain the host printer name, as in kyoceramita.co.jp. |
|
|
DNS | Specifies the IP addresses of the primary and secondary |
Server | DNS (Domain Name System) servers. When DHCP/BOOTP |
(Primary, | is turned On, you can select to use either the DNS servers |
Secondary) | obtained via DHCP or the DNS servers being set under this |
| item. |
|
|
WINS | Specifies the IP addresses of the primary and secondary |
Server | WINS (Windows Internet Name Service) servers. When |
(Primary, | DHCP/BOOTP is turned On, you can select to use either the |
Secondary) | WINS server obtained via DHCP or the WINS server being |
| set under this item. |
|
|
Bonjour | Specifies whether or not to automatically obtain an IP |
| address using Bonjour. |
| You can add a Bonjour printer from the Print Center of Mac |
| OS X. When using a Windows operating system, you can |
| use the Bonjour Printer Wizard to add a printer. |
| The following conditions must be satisfied to automatically |
| obtain an IP address using Bonjour: If DHCP/BOOTP is |
| turned Off, an IP address should not be specified. If DHCP/ |
| BOOTP is turned On, automatic IP address assignment by |
| the DHCP server should not be enabled. |
| To allow printing from the Mac OS X system, the printer |
| needs to support KPDL. |
|
|
Bonjour | If Bonjour is turned On, this specifies the Bonjour name to |
Name | be used. |
|
|
IPv6 Settings | Specifies whether or not to enable the IPv6 protocol. |
IPv6 | Select On to use the IPv6 protocol. |
|
|
34 | KYOCERA COMMAND CENTER |