Kyocera Multifunctional Printer manual Advanced Protocols TCP/IP Logical Printers

Models: Multifunctional Printer

1 58
Download 58 pages 60.84 Kb
Page 40
Image 40

COMMAND CENTER Pages

Item

Description

 

 

Protocols

Specifies the protocol to be permitted. The following

 

protocols can be selected.

 

-

LPD

 

-

FTP

 

-

IPP

 

-

HTTP

 

-

SNMP

 

-

RAW Port

 

-

IPP over SSL

 

-

HTTPS

 

 

IP Filters (IPv6)

Specifies the IP addresses to which access is granted. The

IP Address

number of addresses that can be specified varies depending

(IPv6)

on the model used.

 

 

Prefix

Specifies the IPv6 prefix length. It can be a decimal value

Length

between 1 and 128.

 

 

Protocols

Specifies the protocols through which access is granted.The

 

following protocols can be selected.

 

-

LPD

 

-

FTP

 

-

IPP

 

-

HTTP

 

-

RAW Port

 

-

SNMP

 

 

 

Advanced > Protocols > TCP/IP > Logical Printers

This page allows you to configure the Logical Printers. This machine can be used as a virtual printer for converting ASCII print data to PostScript data or for adding and/or replacing a character strings (commands) at the beginning or end of job data. Up to four logical printers can be set.

Each logical printer can be used with either the FTP, LPR, IPP, NetBEUI, or Raw Port protocol. All printout to a non-existent port will be accomplished to Logical Printer1.

Item

Description

 

 

TCP/IP Port

Specifies the port number for the logical printer as well as

Number

the TCP raw port number (9100, etc.). Conversion is applied

 

to data that is input to the specified raw port in accordance

 

with the selected logical printer. This port is invalid if it is

 

given a port number that is the same as that of an already

 

specified port (e.g. FTP or LPD).

Bi-directional Printing

On or Off Bi-directional Printing using the TCP/IP raw port. With this setting Off, all send data are discarded.

In order to have the data that is received from the printer returned to the client when printing with PostScript, PJL and other such commands, it is necessary to On bi-directional printing.

36

KYOCERA COMMAND CENTER

Page 40
Image 40
Kyocera Multifunctional Printer manual Advanced Protocols TCP/IP Logical Printers