Click Delete when the desired addresses are selected.
KYOCERA COMMAND CENTER
4.
Editing a Contact
1. Open the Address Book Contacts page.
2. Click the number or name of the address to edit. The Address Book Contacts - Edit page appears.
3. Modify the information of the address.
4. Click Submit.
Deleting a Contact
1. Open the Address Book Contacts page.
2. Check the desired contact. When the checkbox on the left side of Number is selected, all contacts displayed on the page will be checked.
3. Click Delete Contact.
The Address Book Contacts - Delete page appears. You can confirm the addresses to be deleted
Click Submit.
4.
Basic > Defaults > Address Book > Contacts
This page allows you to add, edit or delete Contacts.
Adding a New Contact
1. Open the Address Book Contacts page.
2. Click Add Contact. The Address Book Contacts - Add page opens.
3. Enter the information for the address to be registered. You can specify a FAX number and i-FAX address even if the FAX System is not installed.

COMMAND CENTER Pages

Item

Description

 

 

RAM Disk Mode

Specifies whether to use a part of the print system memory

 

as a RAM disk. You can specify the size of the print system

 

memory to use for the RAM disk. If this item is On, electronic

 

sorting is enabled and the printing speed increases. After

 

you have changed the setting, you must restart the printing

 

system.

 

 

RAM Disk Size

Specifies the size of the RAM disk. For allowable sizes, refer

 

to the print system operation guide. After you have changed

 

the setting, you must restart the printing system.

 

 

File Name

You can change the file name for the scan data or the job

 

name for the jobs on the Job page.

 

 

Additional

You can add a Job Number or the Data and Time to the File

Information

Name designated above. The additional information varies

 

depending on model.

 

 

10

Page 14
Image 14
Kyocera Multifunctional Printer manual RAM Disk Mode, RAM Disk Size, File Name, Additional