Prestige 2000W_V2 User’s Guide

Use the following screen to set up your Prestige to connect to the SIP server.

Note: Enter either the IP address of your SIP server or the URL domain name as given to you by your ITSP.

Figure 33 SIP Configuration

Table 19 IP Configuration

LABEL

DESCRIPTION

 

 

SIP Proxy

 

 

 

SIP URI

Type the SIP telephone number assigned to your Prestige by your ITSP

 

then the corresponding telephone IP address or URL, and finally a port

 

number with which to make a telephone connection.

 

Note that a URL can be used or domain name can be used instead of

 

an IP address. Your incoming server supplies the rest of the address.

SIP Server Address

Type the IP address or domain name of the SIP server in this field. It

 

doesn’t matter whether the SIP server is a proxy, redirect or register

 

server. You can use up to 95 ASCII characters.

SIP Server Port

Enter the SIP server’s listening port for SIP in this field. Leave this field

 

set to the default if your VoIP service provider did not give you a server

 

port number for SIP.

Chapter 13 Administrator Web Configurator Screens

97

Page 97
Image 97
ZyXEL Communications 2000W manual SIP Configuration, Sip Uri