Prestige 202H User’s Guide

1.Choose SUA Only if you have just one public WAN IP address for your Prestige.

2.Choose Full Feature if you have multiple public WAN IP addresses for your Prestige.

11.2 Applying NAT

You apply NAT via menus 4 or 11.3 as displayed next. The next figure shows you how to apply NAT for Internet access in menu 4. Enter 4 from the main menu to go to Menu 4 - Internet Access Setup.

Menu 4 - Internet Access Setup

ISP's Name= ChangeMe

Pri Phone #= 1234

Sec Phone #=

My Login= ChangeMe

My Password= ********

My WAN IP Addr= 0.0.0.0

NAT= SUA Only

Address Mapping Set= N/A

Telco Options:

Transfer Type= 64K

Multilink= Off

Idle Timeout= 100

Press ENTER to Confirm or ESC to Cancel:

Figure 11-3 Applying NAT for Internet Access

The following figure shows how you apply NAT to the remote node in menu 11.1. Step 1. Enter 11 from the main menu and select a remote node.

Step 2. Move the cursor to the Edit IP field, press [SPACE BAR] to select Yes and then press [ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.

11-6

Dial-in Setup