
Prestige 202H User’s Guide
Menu 11.3 - Remote Node Network Layer Options
Rem IP Addr:
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= None
Address Mapping Set= Full Feature
Metric= 2
Private= No
RIP Direction= Both
Version=
Press ENTER to Confirm or ESC to Cancel:
TableFIELD | DESCRIPTION | EXAMPLE |
|
|
|
Rem IP Addr | This will show the IP address you entered for this remote node |
|
| in the previous menu. |
|
Rem Subnet Mask | Enter the subnet mask for the remote network. |
|
|
|
|
My WAN Addr | Some implementations, especially the UNIX derivatives, |
|
| require the ISDN link to have a separate IP network number |
|
| from the LAN and each end must have a unique address within |
|
| the WAN network number. If this is the case, enter the IP |
|
| address assigned to the ISDN port of your Prestige. |
|
| NOTE: This is the address assigned to your local Prestige |
|
| WAN, not the remote router. If the remote router is a Prestige, |
|
| then this entry determines the local Prestige Rem IP Addr in |
|
| Menu 11.1. |
|
|
|
|
NAT | Choose from None, Full Feature, or SUA Only. When you | Full Feature |
| select Full Feature you must configure at least one address |
|
Address Mapping | mapping set! |
|
For more information about NAT and the choices listed refer to |
| |
Set |
| |
| the NAT Chapter. |
|
| A NAT Server Set is a list of LAN side servers mapped to |
|
| external ports (similar to the old SUA Menu 15.1 before). You |
|
| may enter any server set number up to 10 but the first one is |
|
| used for SUA only. |
|
|
|
|
Remote Node Configuration |