Prestige 202H User’s Guide

When you press [ENTER] to confirm, the following screen appears. Note that there is only one filter rule in this set.

 

Menu 21.1.9 - Filter Rules Summary

 

# A Type

Filter Rules

M m n

- -

---- --------------------------------------------------------------- - - -

1

Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=23

N D F

2

N

 

 

3

N

 

 

4

N

 

 

5

N

 

 

6

N

 

 

Enter Filter Rule Number (1-6) to Configure: 1

This shows you that you have configured and activated (A = Y) a TCP/IP filter rule (Type = IP, Pr = 6) for destination telnet ports (DP = 23).

M = N means an action can be taken immediately. The action is to drop the packet (m = D) if the action is matched and to forward the packet immediately (n = F) if the action is not matched no matter whether there are more rules to be checked (there aren’t in this example).

Figure 18-15 Sample Filter Rules Summary Menu 21.1.9

After you have created the filter set, you must apply it.

Step 8. Type 11 in the main menu to go to menu 11 and type the remote node number to edit.

Step 9. Go to the Edit Filter Sets field, press [SPACE BAR] to choose Yes and press [ENTER].

Step 10. This brings you to menu 11.5. Apply the example filter set (for example, filter set 3) in this menu as shown in the next section.

18.6 Applying Filters and Factory Defaults

Filter Configuration

18-19