
Prestige 202H User’s Guide
To configure an IP static route, use Menu 12 – IP Static Route Setup, as displayed next.
Menu 12 - IP Static Route Setup
1.________
2.________
3.________
4.________
5.________
6.________
7.________
8.________
Enter selection number:
FigureFrom Menu 12, select one of the available IP static routes to open Menu 12.1 – Edit IP Static Route, as shown next.
|
| Menu 12.1 - Edit IP Static Route |
|
|
| Route #: 1 |
|
|
| Route Name= RouteName |
|
|
| Active= No |
|
|
| Destination IP Address= ? |
|
|
| IP Subnet Mask= ? |
|
|
| Gateway IP Address= ? |
|
|
| Metric= 2 |
|
|
| Private= No |
|
|
| Press ENTER to Confirm or ESC to Cancel: |
|
|
| Figure | |
|
| Table | |
|
|
|
|
FIELD | DESCRIPTION | ||
|
|
|
|
Route Name | Enter a descriptive name for this route. This is for identification purposes only. | ||
|
|
|
|
Active | This field allows you to activate/deactivate this static route. | ||
|
|
|
|
Destination IP | This parameter specifies the IP network address of the final destination. Routing is | ||
Address | always based on network number. If you need to specify a route to a single host, use a | ||
|
| subnet mask of 255.255.255.255 in the subnet mask field to force the network number | |
|
| to be identical to the host ID. | |
|
|
|
|
Remote Node TCP/IP Configuration |