
Prestige 202H User’s Guide
FIELD | DESCRIPTION | EXAMPLE |
|
|
|
IP Alias 1 or 2 | Choose Yes to configure the LAN network for the router. | Yes |
|
|
|
IP Address | Enter the IP address of your router in dotted decimal notation. | 192.168.2.1 |
|
|
|
IP Subnet | Your router will automatically calculate the subnet mask based on the IP | 255.255.255.0 |
Mask | address that you assign. Unless you are implementing subnetting, use the |
|
| subnet mask computed by the router. |
|
|
|
|
RIP Direction | Press [SPACE BAR] and then [ENTER] to select the RIP direction from | Both |
| Both/In Only/Out Only. |
|
Version | Press [SPACE BAR] and then [ENTER] to select the RIP version from RIP- | |
|
| |
Incoming | Enter the filter set(s) you wish to apply to the incoming traffic between this |
|
Protocol Filters | node and the router. |
|
Outgoing | Enter the filter set(s) you wish to apply to the outgoing traffic between this |
|
Protocol Filters | node and the router. |
|
|
|
|
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.
Ethernet Setup |