Prestige 202H User’s Guide

5.2.1 Configuring Advanced Setup

Menu 2.1 - ISDN Advanced Setup

Calling Line Indication= Enable

PABX Outside Line Prefix=

PABX Number (Include S/T Bus Number) for Loopback=

Outgoing Calling Party Number:

ISDN Data

= 80010029

Data Link Connection= point-to-multipoint

Press ENTER to Confirm or ESC to Cancel:

Figure 5-3 Menu 2 ISDN Setup for DSS1

When you are finished, press [ENTER] at the message: ‘Press ENTER to confirm’, the router uses the information that you entered to initialize the ISDN line. It should be noted that whenever the switch type is changed, the ISDN initialization takes slightly longer.

At this point, the router asks if you wish to test your ISDN. If you select Yes, the router will perform a loopback test to check the ISDN line. If the loop-back test fails, please note the error message that you receive and take the appropriate troubleshooting action.

Setup LoopBack Test ...

Dialing to 40000// ...

Sending and Receiving Data ...

Disconnecting ...

LoopBack Test OK

### Hit any key to continue. ###

Figure 5-4 Loopback Test

.

5-4

ISDN Setup